{
  "language": "Solidity",
  "sources": {
    "contracts/PactMainnetEscrow.sol": {
      "content": "// SPDX-License-Identifier: MIT\npragma solidity ^0.8.30;\n\nimport {IERC20} from \"@openzeppelin/contracts/token/ERC20/IERC20.sol\";\nimport {IERC20Metadata} from \"@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol\";\nimport {SafeERC20} from \"@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol\";\nimport {ReentrancyGuard} from \"@openzeppelin/contracts/utils/ReentrancyGuard.sol\";\n\n/// @notice PACT's Base mainnet escrow for Circle-native USDC. No owner, upgrades, fees, or admin withdrawals.\n/// @dev A paid receipt proves a transfer and the client's approval, not independent work quality.\ncontract PactMainnetEscrow is ReentrancyGuard {\n    using SafeERC20 for IERC20;\n\n    uint256 public constant CHAIN_ID = 8453;\n    uint256 public constant MAX_TOTAL = 1_000_000 * 1e6;\n    uint256 public constant MAX_DELEGATION = 90 days;\n    uint8 public constant SUBMIT = 1;\n    uint8 public constant REVIEW = 2;\n    IERC20 public constant token = IERC20(0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913);\n    uint256 public totalEscrowed;\n\n    // Agreement statuses: 1 funded/unaccepted, 2 active, 3 completed, 4 refunded.\n    struct Agreement {\n        address client;\n        address provider;\n        bytes32 termsHash;\n        uint64 refundAfter;\n        uint8 milestoneCount;\n        uint8 currentMilestone;\n        uint8 status;\n        uint256 total;\n        uint256 remaining;\n    }\n    // Milestone statuses: 0 pending, 1 submitted, 2 revision requested, 3 paid.\n    struct Milestone { uint256 amount; uint8 status; bytes32 evidenceHash; }\n    struct Delegate { uint8 permissions; uint64 expiresAt; uint256 allowance; }\n    struct Reputation { uint256 completedAgreements; uint256 paidMilestones; uint256 totalReceived; uint256 uniqueClients; }\n\n    mapping(bytes32 => Agreement) private agreements;\n    mapping(bytes32 => mapping(uint256 => Milestone)) private milestones;\n    mapping(bytes32 => mapping(address => mapping(address => Delegate))) private delegates;\n    mapping(address => Reputation) private reputation;\n    mapping(address => mapping(address => bool)) private paidCounterparties;\n    mapping(bytes32 => address) public cancellationRequestedBy;\n\n    error WrongNetwork();\n    error InvalidToken();\n    error InvalidTerms();\n    error AgreementExists();\n    error AgreementMissing();\n    error Unauthorized();\n    error InvalidState();\n    error InvalidDelegate();\n    error AllowanceExceeded();\n    error TooEarly();\n    error AcceptanceExpired();\n    error UnsupportedTokenTransfer();\n\n    event AgreementFunded(bytes32 indexed id, address indexed client, address indexed provider, bytes32 termsHash, uint256 total, uint8 milestoneCount, uint64 refundAfter);\n    event AgreementAccepted(bytes32 indexed id, address indexed provider);\n    event EvidenceSubmitted(bytes32 indexed id, uint8 indexed milestone, bytes32 evidenceHash, address indexed actor);\n    event RevisionRequested(bytes32 indexed id, uint8 indexed milestone, address indexed actor);\n    event MilestonePaid(bytes32 indexed id, uint8 indexed milestone, address indexed provider, address client, uint256 amount, bytes32 evidenceHash, address actor);\n    event AgreementCompleted(bytes32 indexed id, address indexed provider, address indexed client, bytes32 termsHash, uint256 total);\n    event RemainingRefunded(bytes32 indexed id, address indexed client, uint256 amount, address indexed actor);\n    event DelegateSet(bytes32 indexed id, address indexed principal, address indexed operator, uint8 permissions, uint64 expiresAt, uint256 allowance);\n    event CancellationRequested(bytes32 indexed id, address indexed requester);\n    event CancellationWithdrawn(bytes32 indexed id, address indexed requester);\n\n    constructor() {\n        if (block.chainid != CHAIN_ID) revert WrongNetwork();\n        if (address(token).code.length == 0 || IERC20Metadata(address(token)).decimals() != 6) revert InvalidToken();\n    }\n\n    function createAgreement(bytes32 id, address provider, uint256[] calldata amounts, bytes32 termsHash, uint64 refundAfter) external nonReentrant {\n        if (agreements[id].client != address(0)) revert AgreementExists();\n        // The payer owns the first 20 bytes of its namespace; outsiders cannot squat a pending id.\n        if (address(uint160(uint256(id) >> 96)) != msg.sender) revert InvalidTerms();\n        if (id == bytes32(0) || termsHash == bytes32(0) || provider == address(0) || provider == msg.sender || amounts.length == 0 || amounts.length > 10) revert InvalidTerms();\n        if (refundAfter < block.timestamp + 15 minutes || refundAfter > block.timestamp + 365 days) revert InvalidTerms();\n        uint256 total;\n        for (uint256 i; i < amounts.length; ++i) {\n            if (amounts[i] == 0 || amounts[i] > MAX_TOTAL) revert InvalidTerms();\n            total += amounts[i];\n            milestones[id][i] = Milestone(amounts[i], 0, bytes32(0));\n        }\n        if (total > MAX_TOTAL) revert InvalidTerms();\n        agreements[id] = Agreement(msg.sender, provider, termsHash, refundAfter, uint8(amounts.length), 0, 1, total, total);\n        totalEscrowed += total;\n        uint256 beforeBalance = token.balanceOf(address(this));\n        token.safeTransferFrom(msg.sender, address(this), total);\n        if (token.balanceOf(address(this)) != beforeBalance + total) revert UnsupportedTokenTransfer();\n        emit AgreementFunded(id, msg.sender, provider, termsHash, total, uint8(amounts.length), refundAfter);\n    }\n\n    function accept(bytes32 id) external {\n        Agreement storage agreement = _agreement(id);\n        if (msg.sender != agreement.provider) revert Unauthorized();\n        if (agreement.status != 1) revert InvalidState();\n        if (block.timestamp >= agreement.refundAfter) revert AcceptanceExpired();\n        agreement.status = 2;\n        emit AgreementAccepted(id, msg.sender);\n    }\n\n    function submit(bytes32 id, uint8 index, bytes32 previousEvidence, bytes32 evidenceHash) external {\n        Agreement storage agreement = _reviewed(id, index, previousEvidence);\n        if (agreement.status != 2) revert InvalidState();\n        if (msg.sender != agreement.provider) _delegate(id, agreement.provider, SUBMIT);\n        if (evidenceHash == bytes32(0)) revert InvalidTerms();\n        Milestone storage milestone = milestones[id][agreement.currentMilestone];\n        if (milestone.status != 0 && milestone.status != 2) revert InvalidState();\n        milestone.evidenceHash = evidenceHash;\n        milestone.status = 1;\n        emit EvidenceSubmitted(id, agreement.currentMilestone, evidenceHash, msg.sender);\n    }\n\n    function requestRevision(bytes32 id, uint8 index, bytes32 evidenceHash) external {\n        Agreement storage agreement = _reviewed(id, index, evidenceHash);\n        if (agreement.status != 2) revert InvalidState();\n        if (msg.sender != agreement.client) _delegate(id, agreement.client, REVIEW);\n        Milestone storage milestone = milestones[id][agreement.currentMilestone];\n        if (milestone.status != 1) revert InvalidState();\n        milestone.status = 2;\n        emit RevisionRequested(id, agreement.currentMilestone, msg.sender);\n    }\n\n    function release(bytes32 id, uint8 index, bytes32 evidenceHash) external nonReentrant {\n        Agreement storage agreement = _reviewed(id, index, evidenceHash);\n        if (agreement.status != 2) revert InvalidState();\n        Milestone storage milestone = milestones[id][index];\n        if (milestone.status != 1) revert InvalidState();\n        uint256 amount = milestone.amount;\n        if (msg.sender != agreement.client) {\n            Delegate storage permission = _delegate(id, agreement.client, REVIEW);\n            if (permission.allowance < amount) revert AllowanceExceeded();\n            permission.allowance -= amount;\n        }\n        milestone.status = 3;\n        agreement.remaining -= amount;\n        agreement.currentMilestone++;\n        totalEscrowed -= amount;\n        Reputation storage record = reputation[agreement.provider];\n        record.paidMilestones++;\n        record.totalReceived += amount;\n        if (!paidCounterparties[agreement.provider][agreement.client]) {\n            paidCounterparties[agreement.provider][agreement.client] = true;\n            record.uniqueClients++;\n        }\n        if (agreement.currentMilestone == agreement.milestoneCount) {\n            agreement.status = 3;\n            record.completedAgreements++;\n            delete cancellationRequestedBy[id];\n        }\n        token.safeTransfer(agreement.provider, amount);\n        emit MilestonePaid(id, index, agreement.provider, agreement.client, amount, milestone.evidenceHash, msg.sender);\n        if (agreement.status == 3) emit AgreementCompleted(id, agreement.provider, agreement.client, agreement.termsHash, agreement.total);\n    }\n\n    /// @notice Provider may return all unpaid funds. Paid milestones cannot be reversed.\n    function refundRemaining(bytes32 id, uint256 expectedRemaining) external nonReentrant {\n        Agreement storage agreement = _agreement(id);\n        if (agreement.remaining != expectedRemaining) revert InvalidState();\n        if (msg.sender != agreement.provider) revert Unauthorized();\n        _refund(id, agreement);\n    }\n\n    /// @notice An unaccepted offer can be reclaimed by its client after the acceptance deadline.\n    function refundUnaccepted(bytes32 id) external nonReentrant {\n        Agreement storage agreement = _agreement(id);\n        if (msg.sender != agreement.client) revert Unauthorized();\n        if (agreement.status != 1) revert InvalidState();\n        if (block.timestamp < agreement.refundAfter) revert TooEarly();\n        _refund(id, agreement);\n    }\n\n    function requestCancellation(bytes32 id) external {\n        Agreement storage agreement = _agreement(id);\n        _party(agreement);\n        if (agreement.status != 1 && agreement.status != 2) revert InvalidState();\n        if (cancellationRequestedBy[id] != address(0)) revert InvalidState();\n        cancellationRequestedBy[id] = msg.sender;\n        emit CancellationRequested(id, msg.sender);\n    }\n\n    function approveCancellation(bytes32 id, uint256 expectedRemaining) external nonReentrant {\n        Agreement storage agreement = _agreement(id);\n        if (agreement.remaining != expectedRemaining) revert InvalidState();\n        _party(agreement);\n        address requester = cancellationRequestedBy[id];\n        if (requester == address(0) || requester == msg.sender) revert Unauthorized();\n        _refund(id, agreement);\n    }\n\n    function withdrawCancellation(bytes32 id) external {\n        if (cancellationRequestedBy[id] != msg.sender) revert Unauthorized();\n        delete cancellationRequestedBy[id];\n        emit CancellationWithdrawn(id, msg.sender);\n    }\n\n    /// @notice Each party can delegate only its own role, for one agreement, with an explicit expiry.\n    /// @param allowance Maximum remaining USDC base units a client delegate may release (six decimals).\n    function setDelegate(bytes32 id, address operator, uint8 permissions, uint64 expiresAt, uint256 allowance) external {\n        Agreement storage agreement = _agreement(id);\n        _party(agreement);\n        if (agreement.status != 1 && agreement.status != 2) revert InvalidState();\n        if (operator == address(0) || operator == agreement.client || operator == agreement.provider) revert InvalidDelegate();\n        if (permissions == 0) {\n            delete delegates[id][msg.sender][operator];\n            emit DelegateSet(id, msg.sender, operator, 0, 0, 0);\n            return;\n        }\n        uint8 ownPermission = msg.sender == agreement.client ? REVIEW : SUBMIT;\n        if (permissions != ownPermission || expiresAt <= block.timestamp || expiresAt > block.timestamp + MAX_DELEGATION) revert InvalidDelegate();\n        if ((ownPermission == SUBMIT && allowance != 0) || allowance > agreement.remaining) revert InvalidDelegate();\n        delegates[id][msg.sender][operator] = Delegate(permissions, expiresAt, allowance);\n        emit DelegateSet(id, msg.sender, operator, permissions, expiresAt, allowance);\n    }\n\n    function getAgreement(bytes32 id) external view returns (Agreement memory) { return agreements[id]; }\n    function getMilestone(bytes32 id, uint256 index) external view returns (Milestone memory) {\n        if (agreements[id].client == address(0)) revert AgreementMissing();\n        if (index >= agreements[id].milestoneCount) revert InvalidTerms();\n        return milestones[id][index];\n    }\n    function getDelegate(bytes32 id, address principal, address operator) external view returns (Delegate memory) { return delegates[id][principal][operator]; }\n    function getReputation(address provider) external view returns (Reputation memory) { return reputation[provider]; }\n\n    function _agreement(bytes32 id) private view returns (Agreement storage agreement) {\n        agreement = agreements[id];\n        if (agreement.client == address(0)) revert AgreementMissing();\n    }\n    /// @dev Bind wallet authorizations to the milestone and evidence visible when signing.\n    function _reviewed(bytes32 id, uint8 index, bytes32 evidenceHash) private view returns (Agreement storage agreement) {\n        agreement = _agreement(id);\n        if (agreement.currentMilestone != index || milestones[id][index].evidenceHash != evidenceHash) revert InvalidState();\n    }\n\n    function _party(Agreement storage agreement) private view {\n        if (msg.sender != agreement.client && msg.sender != agreement.provider) revert Unauthorized();\n    }\n    function _delegate(bytes32 id, address principal, uint8 permission) private view returns (Delegate storage result) {\n        result = delegates[id][principal][msg.sender];\n        if (result.permissions & permission == 0 || result.expiresAt <= block.timestamp) revert Unauthorized();\n    }\n    function _refund(bytes32 id, Agreement storage agreement) private {\n        if (agreement.status != 1 && agreement.status != 2) revert InvalidState();\n        uint256 amount = agreement.remaining;\n        agreement.remaining = 0;\n        agreement.status = 4;\n        totalEscrowed -= amount;\n        delete cancellationRequestedBy[id];\n        token.safeTransfer(agreement.client, amount);\n        emit RemainingRefunded(id, agreement.client, amount, msg.sender);\n    }\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/IERC20.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-20 standard as defined in the ERC.\n */\ninterface IERC20 {\n    /**\n     * @dev Emitted when `value` tokens are moved from one account (`from`) to\n     * another (`to`).\n     *\n     * Note that `value` may be zero.\n     */\n    event Transfer(address indexed from, address indexed to, uint256 value);\n\n    /**\n     * @dev Emitted when the allowance of a `spender` for an `owner` is set by\n     * a call to {approve}. `value` is the new allowance.\n     */\n    event Approval(address indexed owner, address indexed spender, uint256 value);\n\n    /**\n     * @dev Returns the value of tokens in existence.\n     */\n    function totalSupply() external view returns (uint256);\n\n    /**\n     * @dev Returns the value of tokens owned by `account`.\n     */\n    function balanceOf(address account) external view returns (uint256);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transfer(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Returns the remaining number of tokens that `spender` will be\n     * allowed to spend on behalf of `owner` through {transferFrom}. This is\n     * zero by default.\n     *\n     * This value changes when {approve} or {transferFrom} are called.\n     */\n    function allowance(address owner, address spender) external view returns (uint256);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * IMPORTANT: Beware that changing an allowance with this method brings the risk\n     * that someone may use both the old and the new allowance by unfortunate\n     * transaction ordering. One possible solution to mitigate this race\n     * condition is to first reduce the spender's allowance to 0 and set the\n     * desired value afterwards:\n     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729\n     *\n     * Emits an {Approval} event.\n     */\n    function approve(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the\n     * allowance mechanism. `value` is then deducted from the caller's\n     * allowance.\n     *\n     * Returns a boolean value indicating whether the operation succeeded.\n     *\n     * Emits a {Transfer} event.\n     */\n    function transferFrom(address from, address to, uint256 value) external returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (token/ERC20/extensions/IERC20Metadata.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"../IERC20.sol\";\n\n/**\n * @dev Interface for the optional metadata functions from the ERC-20 standard.\n */\ninterface IERC20Metadata is IERC20 {\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() external view returns (string memory);\n\n    /**\n     * @dev Returns the symbol of the token.\n     */\n    function symbol() external view returns (string memory);\n\n    /**\n     * @dev Returns the decimals places of the token.\n     */\n    function decimals() external view returns (uint8);\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (token/ERC20/utils/SafeERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"../IERC20.sol\";\nimport {IERC1363} from \"../../../interfaces/IERC1363.sol\";\n\n/**\n * @title SafeERC20\n * @dev Wrappers around ERC-20 operations that throw on failure (when the token\n * contract returns false). Tokens that return no value (and instead revert or\n * throw on failure) are also supported, non-reverting calls are assumed to be\n * successful.\n * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,\n * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.\n */\nlibrary SafeERC20 {\n    /**\n     * @dev An operation with an ERC-20 token failed.\n     */\n    error SafeERC20FailedOperation(address token);\n\n    /**\n     * @dev Indicates a failed `decreaseAllowance` request.\n     */\n    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);\n\n    /**\n     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     */\n    function safeTransfer(IERC20 token, address to, uint256 value) internal {\n        if (!_safeTransfer(token, to, value, true)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the\n     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.\n     */\n    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {\n        if (!_safeTransferFrom(token, from, to, value, true)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Variant of {safeTransfer} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransfer(IERC20 token, address to, uint256 value) internal returns (bool) {\n        return _safeTransfer(token, to, value, false);\n    }\n\n    /**\n     * @dev Variant of {safeTransferFrom} that returns a bool instead of reverting if the operation is not successful.\n     */\n    function trySafeTransferFrom(IERC20 token, address from, address to, uint256 value) internal returns (bool) {\n        return _safeTransferFrom(token, from, to, value, false);\n    }\n\n    /**\n     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {\n        uint256 oldAllowance = token.allowance(address(this), spender);\n        forceApprove(token, spender, oldAllowance + value);\n    }\n\n    /**\n     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no\n     * value, non-reverting calls are assumed to be successful.\n     *\n     * IMPORTANT: If the token implements ERC-7674 (ERC-20 with temporary allowance), and if the \"client\"\n     * smart contract uses ERC-7674 to set temporary allowances, then the \"client\" smart contract should avoid using\n     * this function. Performing a {safeIncreaseAllowance} or {safeDecreaseAllowance} operation on a token contract\n     * that has a non-zero temporary allowance (for that particular owner-spender) will result in unexpected behavior.\n     */\n    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {\n        unchecked {\n            uint256 currentAllowance = token.allowance(address(this), spender);\n            if (currentAllowance < requestedDecrease) {\n                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);\n            }\n            forceApprove(token, spender, currentAllowance - requestedDecrease);\n        }\n    }\n\n    /**\n     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,\n     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval\n     * to be set to zero before setting it to a non-zero value, such as USDT.\n     *\n     * NOTE: If the token implements ERC-7674, this function will not modify any temporary allowance. This function\n     * only sets the \"standard\" allowance. Any temporary allowance will remain active, in addition to the value being\n     * set here.\n     */\n    function forceApprove(IERC20 token, address spender, uint256 value) internal {\n        if (!_safeApprove(token, spender, value, false)) {\n            if (!_safeApprove(token, spender, 0, true)) revert SafeERC20FailedOperation(address(token));\n            if (!_safeApprove(token, spender, value, true)) revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferAndCall, with a fallback to the simple {ERC20} transfer if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that relies on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            safeTransfer(token, to, value);\n        } else if (!token.transferAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} transferFromAndCall, with a fallback to the simple {ERC20} transferFrom if the target\n     * has no code. This can be used to implement an {ERC721}-like safe transfer that relies on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function transferFromAndCallRelaxed(\n        IERC1363 token,\n        address from,\n        address to,\n        uint256 value,\n        bytes memory data\n    ) internal {\n        if (to.code.length == 0) {\n            safeTransferFrom(token, from, to, value);\n        } else if (!token.transferFromAndCall(from, to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Performs an {ERC1363} approveAndCall, with a fallback to the simple {ERC20} approve if the target has no\n     * code. This can be used to implement an {ERC721}-like safe transfer that rely on {ERC1363} checks when\n     * targeting contracts.\n     *\n     * NOTE: When the recipient address (`to`) has no code (i.e. is an EOA), this function behaves as {forceApprove}.\n     * Oppositely, when the recipient address (`to`) has code, this function only attempts to call {ERC1363-approveAndCall}\n     * once without retrying, and relies on the returned value to be true.\n     *\n     * Reverts if the returned value is other than `true`.\n     */\n    function approveAndCallRelaxed(IERC1363 token, address to, uint256 value, bytes memory data) internal {\n        if (to.code.length == 0) {\n            forceApprove(token, to, value);\n        } else if (!token.approveAndCall(to, value, data)) {\n            revert SafeERC20FailedOperation(address(token));\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.transfer(to, value)` call, relaxing the requirement on the return value: the\n     * return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param to The recipient of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeTransfer(IERC20 token, address to, uint256 value, bool bubble) private returns (bool success) {\n        bytes4 selector = IERC20.transfer.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(to, shr(96, not(0))))\n            mstore(0x24, value)\n            success := call(gas(), token, 0, 0x00, 0x44, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.transferFrom(from, to, value)` call, relaxing the requirement on the return\n     * value: the return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param from The sender of the tokens\n     * @param to The recipient of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeTransferFrom(\n        IERC20 token,\n        address from,\n        address to,\n        uint256 value,\n        bool bubble\n    ) private returns (bool success) {\n        bytes4 selector = IERC20.transferFrom.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(from, shr(96, not(0))))\n            mstore(0x24, and(to, shr(96, not(0))))\n            mstore(0x44, value)\n            success := call(gas(), token, 0, 0x00, 0x64, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n            mstore(0x60, 0)\n        }\n    }\n\n    /**\n     * @dev Imitates a Solidity `token.approve(spender, value)` call, relaxing the requirement on the return value:\n     * the return value is optional (but if data is returned, it must not be false).\n     *\n     * @param token The token targeted by the call.\n     * @param spender The spender of the tokens\n     * @param value The amount of token to transfer\n     * @param bubble Behavior switch if the transfer call reverts: bubble the revert reason or return a false boolean.\n     */\n    function _safeApprove(IERC20 token, address spender, uint256 value, bool bubble) private returns (bool success) {\n        bytes4 selector = IERC20.approve.selector;\n\n        assembly (\"memory-safe\") {\n            let fmp := mload(0x40)\n            mstore(0x00, selector)\n            mstore(0x04, and(spender, shr(96, not(0))))\n            mstore(0x24, value)\n            success := call(gas(), token, 0, 0x00, 0x44, 0x00, 0x20)\n            // if call success and return is true, all is good.\n            // otherwise (not success or return is not true), we need to perform further checks\n            if iszero(and(success, eq(mload(0x00), 1))) {\n                // if the call was a failure and bubble is enabled, bubble the error\n                if and(iszero(success), bubble) {\n                    returndatacopy(fmp, 0x00, returndatasize())\n                    revert(fmp, returndatasize())\n                }\n                // if the return value is not true, then the call is only successful if:\n                // - the token address has code\n                // - the returndata is empty\n                success := and(success, and(iszero(returndatasize()), gt(extcodesize(token), 0)))\n            }\n            mstore(0x40, fmp)\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/ReentrancyGuard.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (utils/ReentrancyGuard.sol)\n\npragma solidity ^0.8.20;\n\nimport {StorageSlot} from \"./StorageSlot.sol\";\n\n/**\n * @dev Contract module that helps prevent reentrant calls to a function.\n *\n * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier\n * available, which can be applied to functions to make sure there are no nested\n * (reentrant) calls to them.\n *\n * Note that because there is a single `nonReentrant` guard, functions marked as\n * `nonReentrant` may not call one another. This can be worked around by making\n * those functions `private`, and then adding `external` `nonReentrant` entry\n * points to them.\n *\n * TIP: If EIP-1153 (transient storage) is available on the chain you're deploying at,\n * consider using {ReentrancyGuardTransient} instead.\n *\n * TIP: If you would like to learn more about reentrancy and alternative ways\n * to protect against it, check out our blog post\n * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].\n *\n * IMPORTANT: Deprecated. This storage-based reentrancy guard will be removed and replaced\n * by the {ReentrancyGuardTransient} variant in v6.0.\n *\n * @custom:stateless\n */\nabstract contract ReentrancyGuard {\n    using StorageSlot for bytes32;\n\n    // keccak256(abi.encode(uint256(keccak256(\"openzeppelin.storage.ReentrancyGuard\")) - 1)) & ~bytes32(uint256(0xff))\n    bytes32 private constant REENTRANCY_GUARD_STORAGE =\n        0x9b779b17422d0df92223018b32b4d1fa46e071723d6817e2486d003becc55f00;\n\n    // Booleans are more expensive than uint256 or any type that takes up a full\n    // word because each write operation emits an extra SLOAD to first read the\n    // slot's contents, replace the bits taken up by the boolean, and then write\n    // back. This is the compiler's defense against contract upgrades and\n    // pointer aliasing, and it cannot be disabled.\n\n    // The values being non-zero value makes deployment a bit more expensive,\n    // but in exchange the refund on every call to nonReentrant will be lower in\n    // amount. Since refunds are capped to a percentage of the total\n    // transaction's gas, it is best to keep them low in cases like this one, to\n    // increase the likelihood of the full refund coming into effect.\n    uint256 private constant NOT_ENTERED = 1;\n    uint256 private constant ENTERED = 2;\n\n    /**\n     * @dev Unauthorized reentrant call.\n     */\n    error ReentrancyGuardReentrantCall();\n\n    constructor() {\n        _reentrancyGuardStorageSlot().getUint256Slot().value = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Prevents a contract from calling itself, directly or indirectly.\n     * Calling a `nonReentrant` function from another `nonReentrant`\n     * function is not supported. It is possible to prevent this from happening\n     * by making the `nonReentrant` function external, and making it call a\n     * `private` function that does the actual work.\n     */\n    modifier nonReentrant() {\n        _nonReentrantBefore();\n        _;\n        _nonReentrantAfter();\n    }\n\n    /**\n     * @dev A `view` only version of {nonReentrant}. Use to block view functions\n     * from being called, preventing reading from inconsistent contract state.\n     *\n     * CAUTION: This is a \"view\" modifier and does not change the reentrancy\n     * status. Use it only on view functions. For payable or non-payable functions,\n     * use the standard {nonReentrant} modifier instead.\n     */\n    modifier nonReentrantView() {\n        _nonReentrantBeforeView();\n        _;\n    }\n\n    function _nonReentrantBeforeView() private view {\n        if (_reentrancyGuardEntered()) {\n            revert ReentrancyGuardReentrantCall();\n        }\n    }\n\n    function _nonReentrantBefore() private {\n        // On the first call to nonReentrant, _status will be NOT_ENTERED\n        _nonReentrantBeforeView();\n\n        // Any calls to nonReentrant after this point will fail\n        _reentrancyGuardStorageSlot().getUint256Slot().value = ENTERED;\n    }\n\n    function _nonReentrantAfter() private {\n        // By storing the original value once again, a refund is triggered (see\n        // https://eips.ethereum.org/EIPS/eip-2200)\n        _reentrancyGuardStorageSlot().getUint256Slot().value = NOT_ENTERED;\n    }\n\n    /**\n     * @dev Returns true if the reentrancy guard is currently set to \"entered\", which indicates there is a\n     * `nonReentrant` function in the call stack.\n     */\n    function _reentrancyGuardEntered() internal view returns (bool) {\n        return _reentrancyGuardStorageSlot().getUint256Slot().value == ENTERED;\n    }\n\n    function _reentrancyGuardStorageSlot() internal pure virtual returns (bytes32) {\n        return REENTRANCY_GUARD_STORAGE;\n    }\n}\n"
    },
    "@openzeppelin/contracts/token/ERC20/ERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (token/ERC20/ERC20.sol)\n\npragma solidity ^0.8.20;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC20Metadata} from \"./extensions/IERC20Metadata.sol\";\nimport {Context} from \"../../utils/Context.sol\";\nimport {IERC20Errors} from \"../../interfaces/draft-IERC6093.sol\";\n\n/**\n * @dev Implementation of the {IERC20} interface.\n *\n * This implementation is agnostic to the way tokens are created. This means\n * that a supply mechanism has to be added in a derived contract using {_mint}.\n *\n * TIP: For a detailed writeup see our guide\n * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How\n * to implement supply mechanisms].\n *\n * The default value of {decimals} is 18. To change this, you should override\n * this function so it returns a different value.\n *\n * We have followed general OpenZeppelin Contracts guidelines: functions revert\n * instead returning `false` on failure. This behavior is nonetheless\n * conventional and does not conflict with the expectations of ERC-20\n * applications.\n */\nabstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {\n    mapping(address account => uint256) private _balances;\n\n    mapping(address account => mapping(address spender => uint256)) private _allowances;\n\n    uint256 private _totalSupply;\n\n    string private _name;\n    string private _symbol;\n\n    /**\n     * @dev Sets the values for {name} and {symbol}.\n     *\n     * Both values are immutable: they can only be set once during construction.\n     */\n    constructor(string memory name_, string memory symbol_) {\n        _name = name_;\n        _symbol = symbol_;\n    }\n\n    /**\n     * @dev Returns the name of the token.\n     */\n    function name() public view virtual returns (string memory) {\n        return _name;\n    }\n\n    /**\n     * @dev Returns the symbol of the token, usually a shorter version of the\n     * name.\n     */\n    function symbol() public view virtual returns (string memory) {\n        return _symbol;\n    }\n\n    /**\n     * @dev Returns the number of decimals used to get its user representation.\n     * For example, if `decimals` equals `2`, a balance of `505` tokens should\n     * be displayed to a user as `5.05` (`505 / 10 ** 2`).\n     *\n     * Tokens usually opt for a value of 18, imitating the relationship between\n     * Ether and Wei. This is the default value returned by this function, unless\n     * it's overridden.\n     *\n     * NOTE: This information is only used for _display_ purposes: it in\n     * no way affects any of the arithmetic of the contract, including\n     * {IERC20-balanceOf} and {IERC20-transfer}.\n     */\n    function decimals() public view virtual returns (uint8) {\n        return 18;\n    }\n\n    /// @inheritdoc IERC20\n    function totalSupply() public view virtual returns (uint256) {\n        return _totalSupply;\n    }\n\n    /// @inheritdoc IERC20\n    function balanceOf(address account) public view virtual returns (uint256) {\n        return _balances[account];\n    }\n\n    /**\n     * @dev See {IERC20-transfer}.\n     *\n     * Requirements:\n     *\n     * - `to` cannot be the zero address.\n     * - the caller must have a balance of at least `value`.\n     */\n    function transfer(address to, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _transfer(owner, to, value);\n        return true;\n    }\n\n    /// @inheritdoc IERC20\n    function allowance(address owner, address spender) public view virtual returns (uint256) {\n        return _allowances[owner][spender];\n    }\n\n    /**\n     * @dev See {IERC20-approve}.\n     *\n     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on\n     * `transferFrom`. This is semantically equivalent to an infinite approval.\n     *\n     * Requirements:\n     *\n     * - `spender` cannot be the zero address.\n     */\n    function approve(address spender, uint256 value) public virtual returns (bool) {\n        address owner = _msgSender();\n        _approve(owner, spender, value);\n        return true;\n    }\n\n    /**\n     * @dev See {IERC20-transferFrom}.\n     *\n     * Skips emitting an {Approval} event indicating an allowance update. This is not\n     * required by the ERC. See {xref-ERC20-_approve-address-address-uint256-bool-}[_approve].\n     *\n     * NOTE: Does not update the allowance if the current allowance\n     * is the maximum `uint256`.\n     *\n     * Requirements:\n     *\n     * - `from` and `to` cannot be the zero address.\n     * - `from` must have a balance of at least `value`.\n     * - the caller must have allowance for ``from``'s tokens of at least\n     * `value`.\n     */\n    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {\n        address spender = _msgSender();\n        _spendAllowance(from, spender, value);\n        _transfer(from, to, value);\n        return true;\n    }\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to`.\n     *\n     * This internal function is equivalent to {transfer}, and can be used to\n     * e.g. implement automatic token fees, slashing mechanisms, etc.\n     *\n     * Emits a {Transfer} event.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _transfer(address from, address to, uint256 value) internal {\n        if (from == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        if (to == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(from, to, value);\n    }\n\n    /**\n     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`\n     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding\n     * this function.\n     *\n     * Emits a {Transfer} event.\n     */\n    function _update(address from, address to, uint256 value) internal virtual {\n        if (from == address(0)) {\n            // Overflow check required: The rest of the code assumes that totalSupply never overflows\n            _totalSupply += value;\n        } else {\n            uint256 fromBalance = _balances[from];\n            if (fromBalance < value) {\n                revert ERC20InsufficientBalance(from, fromBalance, value);\n            }\n            unchecked {\n                // Overflow not possible: value <= fromBalance <= totalSupply.\n                _balances[from] = fromBalance - value;\n            }\n        }\n\n        if (to == address(0)) {\n            unchecked {\n                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.\n                _totalSupply -= value;\n            }\n        } else {\n            unchecked {\n                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.\n                _balances[to] += value;\n            }\n        }\n\n        emit Transfer(from, to, value);\n    }\n\n    /**\n     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).\n     * Relies on the `_update` mechanism\n     *\n     * Emits a {Transfer} event with `from` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead.\n     */\n    function _mint(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidReceiver(address(0));\n        }\n        _update(address(0), account, value);\n    }\n\n    /**\n     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.\n     * Relies on the `_update` mechanism.\n     *\n     * Emits a {Transfer} event with `to` set to the zero address.\n     *\n     * NOTE: This function is not virtual, {_update} should be overridden instead\n     */\n    function _burn(address account, uint256 value) internal {\n        if (account == address(0)) {\n            revert ERC20InvalidSender(address(0));\n        }\n        _update(account, address(0), value);\n    }\n\n    /**\n     * @dev Sets `value` as the allowance of `spender` over the `owner`'s tokens.\n     *\n     * This internal function is equivalent to `approve`, and can be used to\n     * e.g. set automatic allowances for certain subsystems, etc.\n     *\n     * Emits an {Approval} event.\n     *\n     * Requirements:\n     *\n     * - `owner` cannot be the zero address.\n     * - `spender` cannot be the zero address.\n     *\n     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.\n     */\n    function _approve(address owner, address spender, uint256 value) internal {\n        _approve(owner, spender, value, true);\n    }\n\n    /**\n     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.\n     *\n     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by\n     * `_spendAllowance` during the `transferFrom` operation sets the flag to false. This saves gas by not emitting any\n     * `Approval` event during `transferFrom` operations.\n     *\n     * Anyone who wishes to continue emitting `Approval` events on the `transferFrom` operation can force the flag to\n     * true using the following override:\n     *\n     * ```solidity\n     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {\n     *     super._approve(owner, spender, value, true);\n     * }\n     * ```\n     *\n     * Requirements are the same as {_approve}.\n     */\n    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {\n        if (owner == address(0)) {\n            revert ERC20InvalidApprover(address(0));\n        }\n        if (spender == address(0)) {\n            revert ERC20InvalidSpender(address(0));\n        }\n        _allowances[owner][spender] = value;\n        if (emitEvent) {\n            emit Approval(owner, spender, value);\n        }\n    }\n\n    /**\n     * @dev Updates `owner`'s allowance for `spender` based on spent `value`.\n     *\n     * Does not update the allowance value in case of infinite allowance.\n     * Revert if not enough allowance is available.\n     *\n     * Does not emit an {Approval} event.\n     */\n    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {\n        uint256 currentAllowance = allowance(owner, spender);\n        if (currentAllowance < type(uint256).max) {\n            if (currentAllowance < value) {\n                revert ERC20InsufficientAllowance(spender, currentAllowance, value);\n            }\n            unchecked {\n                _approve(owner, spender, currentAllowance - value, false);\n            }\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/interfaces/IERC1363.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC1363.sol)\n\npragma solidity >=0.6.2;\n\nimport {IERC20} from \"./IERC20.sol\";\nimport {IERC165} from \"./IERC165.sol\";\n\n/**\n * @title IERC1363\n * @dev Interface of the ERC-1363 standard as defined in the https://eips.ethereum.org/EIPS/eip-1363[ERC-1363].\n *\n * Defines an extension interface for ERC-20 tokens that supports executing code on a recipient contract\n * after `transfer` or `transferFrom`, or code on a spender contract after `approve`, in a single transaction.\n */\ninterface IERC1363 is IERC20, IERC165 {\n    /*\n     * Note: the ERC-165 identifier for this interface is 0xb0202a11.\n     * 0xb0202a11 ===\n     *   bytes4(keccak256('transferAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('transferAndCall(address,uint256,bytes)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256)')) ^\n     *   bytes4(keccak256('transferFromAndCall(address,address,uint256,bytes)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256)')) ^\n     *   bytes4(keccak256('approveAndCall(address,uint256,bytes)'))\n     */\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from the caller's account to `to`\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferAndCall(address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value) external returns (bool);\n\n    /**\n     * @dev Moves a `value` amount of tokens from `from` to `to` using the allowance mechanism\n     * and then calls {IERC1363Receiver-onTransferReceived} on `to`.\n     * @param from The address which you want to send tokens from.\n     * @param to The address which you want to transfer to.\n     * @param value The amount of tokens to be transferred.\n     * @param data Additional data with no specified format, sent in call to `to`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function transferFromAndCall(address from, address to, uint256 value, bytes calldata data) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value) external returns (bool);\n\n    /**\n     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the\n     * caller's tokens and then calls {IERC1363Spender-onApprovalReceived} on `spender`.\n     * @param spender The address which will spend the funds.\n     * @param value The amount of tokens to be spent.\n     * @param data Additional data with no specified format, sent in call to `spender`.\n     * @return A boolean value indicating whether the operation succeeded unless throwing.\n     */\n    function approveAndCall(address spender, uint256 value, bytes calldata data) external returns (bool);\n}\n"
    },
    "@openzeppelin/contracts/utils/StorageSlot.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.1.0) (utils/StorageSlot.sol)\n// This file was procedurally generated from scripts/generate/templates/StorageSlot.js.\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Library for reading and writing primitive types to specific storage slots.\n *\n * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.\n * This library helps with reading and writing to such slots without the need for inline assembly.\n *\n * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.\n *\n * Example usage to set ERC-1967 implementation slot:\n * ```solidity\n * contract ERC1967 {\n *     // Define the slot. Alternatively, use the SlotDerivation library to derive the slot.\n *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;\n *\n *     function _getImplementation() internal view returns (address) {\n *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;\n *     }\n *\n *     function _setImplementation(address newImplementation) internal {\n *         require(newImplementation.code.length > 0);\n *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;\n *     }\n * }\n * ```\n *\n * TIP: Consider using this library along with {SlotDerivation}.\n */\nlibrary StorageSlot {\n    struct AddressSlot {\n        address value;\n    }\n\n    struct BooleanSlot {\n        bool value;\n    }\n\n    struct Bytes32Slot {\n        bytes32 value;\n    }\n\n    struct Uint256Slot {\n        uint256 value;\n    }\n\n    struct Int256Slot {\n        int256 value;\n    }\n\n    struct StringSlot {\n        string value;\n    }\n\n    struct BytesSlot {\n        bytes value;\n    }\n\n    /**\n     * @dev Returns an `AddressSlot` with member `value` located at `slot`.\n     */\n    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BooleanSlot` with member `value` located at `slot`.\n     */\n    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Bytes32Slot` with member `value` located at `slot`.\n     */\n    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Uint256Slot` with member `value` located at `slot`.\n     */\n    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `Int256Slot` with member `value` located at `slot`.\n     */\n    function getInt256Slot(bytes32 slot) internal pure returns (Int256Slot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns a `StringSlot` with member `value` located at `slot`.\n     */\n    function getStringSlot(bytes32 slot) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `StringSlot` representation of the string storage pointer `store`.\n     */\n    function getStringSlot(string storage store) internal pure returns (StringSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n\n    /**\n     * @dev Returns a `BytesSlot` with member `value` located at `slot`.\n     */\n    function getBytesSlot(bytes32 slot) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := slot\n        }\n    }\n\n    /**\n     * @dev Returns an `BytesSlot` representation of the bytes storage pointer `store`.\n     */\n    function getBytesSlot(bytes storage store) internal pure returns (BytesSlot storage r) {\n        assembly (\"memory-safe\") {\n            r.slot := store.slot\n        }\n    }\n}\n"
    },
    "@openzeppelin/contracts/utils/Context.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)\n\npragma solidity ^0.8.20;\n\n/**\n * @dev Provides information about the current execution context, including the\n * sender of the transaction and its data. While these are generally available\n * via msg.sender and msg.data, they should not be accessed in such a direct\n * manner, since when dealing with meta-transactions the account sending and\n * paying for execution may not be the actual sender (as far as an application\n * is concerned).\n *\n * This contract is only required for intermediate, library-like contracts.\n */\nabstract contract Context {\n    function _msgSender() internal view virtual returns (address) {\n        return msg.sender;\n    }\n\n    function _msgData() internal view virtual returns (bytes calldata) {\n        return msg.data;\n    }\n\n    function _contextSuffixLength() internal view virtual returns (uint256) {\n        return 0;\n    }\n}\n"
    },
    "@openzeppelin/contracts/interfaces/draft-IERC6093.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.5.0) (interfaces/draft-IERC6093.sol)\n\npragma solidity >=0.8.4;\n\n/**\n * @dev Standard ERC-20 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-20 tokens.\n */\ninterface IERC20Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC20InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC20InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     * @param allowance Amount of tokens a `spender` is allowed to operate with.\n     * @param needed Minimum amount required to perform a transfer.\n     */\n    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC20InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.\n     * @param spender Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC20InvalidSpender(address spender);\n}\n\n/**\n * @dev Standard ERC-721 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-721 tokens.\n */\ninterface IERC721Errors {\n    /**\n     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in ERC-721.\n     * Used in balance queries.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721InvalidOwner(address owner);\n\n    /**\n     * @dev Indicates a `tokenId` whose `owner` is the zero address.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721NonexistentToken(uint256 tokenId);\n\n    /**\n     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param tokenId Identifier number of a token.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC721InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC721InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC721InsufficientApproval(address operator, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC721InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC721InvalidOperator(address operator);\n}\n\n/**\n * @dev Standard ERC-1155 Errors\n * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC-1155 tokens.\n */\ninterface IERC1155Errors {\n    /**\n     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     * @param balance Current balance for the interacting account.\n     * @param needed Minimum amount required to perform a transfer.\n     * @param tokenId Identifier number of a token.\n     */\n    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);\n\n    /**\n     * @dev Indicates a failure with the token `sender`. Used in transfers.\n     * @param sender Address whose tokens are being transferred.\n     */\n    error ERC1155InvalidSender(address sender);\n\n    /**\n     * @dev Indicates a failure with the token `receiver`. Used in transfers.\n     * @param receiver Address to which tokens are being transferred.\n     */\n    error ERC1155InvalidReceiver(address receiver);\n\n    /**\n     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     * @param owner Address of the current owner of a token.\n     */\n    error ERC1155MissingApprovalForAll(address operator, address owner);\n\n    /**\n     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.\n     * @param approver Address initiating an approval operation.\n     */\n    error ERC1155InvalidApprover(address approver);\n\n    /**\n     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.\n     * @param operator Address that may be allowed to operate on tokens without being their owner.\n     */\n    error ERC1155InvalidOperator(address operator);\n\n    /**\n     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.\n     * Used in batch transfers.\n     * @param idsLength Length of the array of token identifiers\n     * @param valuesLength Length of the array of token amounts\n     */\n    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);\n}\n"
    },
    "@openzeppelin/contracts/interfaces/IERC20.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC20.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC20} from \"../token/ERC20/IERC20.sol\";\n"
    },
    "@openzeppelin/contracts/interfaces/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (interfaces/IERC165.sol)\n\npragma solidity >=0.4.16;\n\nimport {IERC165} from \"../utils/introspection/IERC165.sol\";\n"
    },
    "@openzeppelin/contracts/utils/introspection/IERC165.sol": {
      "content": "// SPDX-License-Identifier: MIT\n// OpenZeppelin Contracts (last updated v5.4.0) (utils/introspection/IERC165.sol)\n\npragma solidity >=0.4.16;\n\n/**\n * @dev Interface of the ERC-165 standard, as defined in the\n * https://eips.ethereum.org/EIPS/eip-165[ERC].\n *\n * Implementers can declare support of contract interfaces, which can then be\n * queried by others ({ERC165Checker}).\n *\n * For an implementation, see {ERC165}.\n */\ninterface IERC165 {\n    /**\n     * @dev Returns true if this contract implements the interface defined by\n     * `interfaceId`. See the corresponding\n     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]\n     * to learn more about how these ids are created.\n     *\n     * This function call must use less than 30 000 gas.\n     */\n    function supportsInterface(bytes4 interfaceId) external view returns (bool);\n}\n"
    }
  },
  "settings": {
    "optimizer": {
      "enabled": true,
      "runs": 200
    },
    "evmVersion": "shanghai",
    "outputSelection": {
      "*": {
        "*": [
          "abi",
          "evm.bytecode.object",
          "evm.deployedBytecode.object",
          "evm.deployedBytecode.immutableReferences",
          "metadata"
        ]
      }
    }
  }
}